|Width /Gap Size||20mm / 6-15mm (600pa Weather Seal)|
|Roll Length||4.3 metres max expansion / 36mm|
Where reveal detail is required at windows and door opening (during Z Stone fitting) all block work must be recessed by a minimum of 50mm, to allow for the return of Z Stone back into the frames. Always check prior to fitting, so as the window and door openings will not be obstructed.
This tape will neatly close off any remaining gaps to give a neat and weatherproof finish. Z Stone may not be returned on the underside of a window or door head. To achieve a finish here, use special width Keystone Lintel, or alternatively finish with a slate reveal unit or rubbed-up plaster detail.
Copyright © 2021 | Lagan Building Solutions