Menu

Roof Fixings

Slate Hooks

slate-hooks NEW.jpg

Slate Hooks

Suitable for situations where nailing is not an option.  Hook fixing is recommended for Brazilian Slate also due to its more brittle nature. All our Slate hooks are stainless stell and powder coated to ensure that they do not rust. 

Eave Clips

Eave Clips

Eave Clips

Used with the Snowdon or Volnay Clay Tiles the Eave Clip is required under BS5534 fixing recommendations to give the clay tile a secure fixing around the perimeter of the roof. 

Tile Clips

Tile Clips.jpg

Tile Clips

Used in conjunction with the Eave Clip for the Snowdon Clay Tile.  LBS insist on the use of tile clips in addition to nailing to ensure a secure fit.  Clay is a much lighter material than concrete and any unnecessary movement in the roof in high winds or exposed areas could result in either chattering of the tiles or potentiall broken or cracked tiles. 

Ridge End Caps

Ridge End Caps.jpg

Ridge End Caps

The Ridge End Caps work in conjunction with the Dry Verge System to provide a neat and attractive finish for round and angled ridge tiles. The end caps provide durable protection at each end of the ridge, eliminating problems caused by water penetration whilst preventing the entry of birds and large insects into the roof cavity.

  • Suitable for new build or refurbishments
  • Special design features to ease fitting
  • Compatible with most types of interlocking clay ridges
  • Fast and easy to fit in all weather conditions
  • Available in Black, Red, Slate Grey and Heather

 

Roof Pitch Compatibility 15 to 55°
Material uPVC
Colours available Black, Red, Slate Grey & Heather

Linear Dry Verge - Fixing Clip

Fixing Clip.jpg

The Linear Dry Verge Fixing Clip can be used to provide additional fixing points along the verge when fixing the LH or RH Linear Verge Units. The Fixing Clip can be nailed to an additional batten strip fixed to the underside of the verge. The first Linear Verge Unit is then clipped securely over the Fixing Clip providing a strong fix to the eaves.

  • Suitable for new build or refurbishment
  • Compatible with natural slate and interlocking clay tiles
  • Robust uPVC material
  • Fast and easy to fit in all weather conditions
Size / Depth 114mm x 70mm / 35mm
Material uPVC
Colour Slate Grey (Not visible when installed)

Linear Dry Verge - Verge Union

Verge Union.jpg

The Verge Union can be used to cover a joint where two LH or RH Linear Verge Units abut each other. For roofs where the bottom course tiles are tilted upwards, cover the nail head and joint using a verge union. Hooke the verge union around the top flange between the linear verge unit and the tiles, then firmly push the verge union onto the joint until the clip engages with both linear verge units.

  • Exceptionally secure
  • Also suitable in sarking board details
  • Compatible with natural slate and interlocking clay tiles
  • Various colours available

 

 

Size 129mm x 50mm x 75mm
Material uPVC
Colours available Black, Red, Slate Grey & Heather

Linear Dry Verge - Eaves End Closure

Eaves End Closure.jpg

The Linear Dry Verge Eaves End are designed to neatly finish and close the bottom section of Linear Dry Verge down at eaves level. In some instances, it may be necessary to extend the bottom Linear Dry Verge unit passed the gutter and fit the Eaves End so that it doesn't foul on the guttering (see illustrations in the Product Info sheet). The Eaves End is will slide into the end of the bottom Linear Dry Verge unit and should be secured in place using a suitable adhesive. 

  • NHBC Standards Chapter 7.2 Approved
  • Compatible with natural slate and interlocking clay tiles
  • Fast and easy to fit in all weather conditions
  • Various colours available
Size 122mm x 68mm x 23mm
Material uPVC
Colours available Black, Red, Slate Grey & Heather

Speak to one of our specialists today