Menu

GRP Dry Fix Bonding Gutter

A GRP Dry Bonding Gutter is a mortarless system which creates a weather tight joint between dissimilar roof coverings on adjacent roofs, and joins any combination of slates or flat and profiled tiles.

The Dry Bonding Gutter is supplied in 3m lengths, in a standard 80mm (low) profile. Depending on the roof covering being used, a 100mm (high) profile is also available upon request. They are finished in a standard lead grey colour, and are BBA certified.

The Dry Bonding Gutter creates a close-cut appearance on refurbished properties where fixing times can be cut by up to 50% over traditional mortar methods. Packs should be stored flat on a smooth, clean dry surface; under cover and protected from sunlight.

  • Improved drainage
  • No mortar required
  • Improved appearance
  • Time saving

GRP Dry Fix Bonding Gutter

Material UV Glass fibre/Polyester laminate
Size 3000mm x 225mm
Pack size 10 per pack
Pack weight 80mm profile = 16kg, 100mm* profile = 21kg (*Available upon request)

Speak to one of our specialists today