Dry Fix Roofing Accessories

Snowdon/Shetland J-Trim (Type 1)

Customised specifically for the LBS Snowdon/Shetland Clay the J Trim provides a weather tight dry fix verge detail on the roof and does away with any kind of mortar bedding in line with recent roof fixing recommendations.  

• Quick and easy to install
• Gives a maintenance free finish
• Rain and wind uplift protection
• Available as a 3m length

Snowdon/Shetland J-Trim (Type 2)

Snowdon/Shetland Type II trim is designed to work specifically with the Snowdon or Shetland Clay.  It is particularly suitable for builds with no soffit detail to prevent the ingress of wind driven rain.  It also provides a tidy finish at the gable. 

• Gives full wind and rain protection
• Easy to install
• Available as a 3m length
• Gives a maintenance free finish

Slate Trim (Type 1)

Our Dry Verge Slate Trim is supplied in 3m lengths and offers the user a complete wind and rain protection solution for their verge.  The verge trim gives a fully dry fixing option with no requirement for mortar bedding.  

• Quick fitting and low maintenance
• Patented drip system clears rain
• Available as a 3m length
• Bespoke alterations on request

Slate Trim (Type 2)

Similar to the 'Type 1' verge trim but with the addition of a leg this particular slate trim also provides a secure and maintenance free finish to the gable.

• Low maintenance 
• Available as a 3m length
• Provides a dry fix weather tight verge
• Other options / colours on request

Linear Dry Verge System

Designed for use with slates and interlocking clay tiles. This system provides a secure mechanical fixing solution for many types of roof coverings and provides an aesthetically pleasing, maintenance free detail to gable ends. *LH or RH available

• The verge units can be easily fitted to the verge of the roof in succession, locking the tiles in place to prevent wind uplift problems
• Exceptionally secure
• Also available in Heather
• Independently tested to conform with the requirements of BS 8612

The Linear Dry Verge Fixing Clip can be used to provide additional fixing points along the verge when fixing the LH or RH Linear Verge Units. The Fixing Clip can be nailed to an additional batten strip fixed to the underside of the verge. The first Linear Verge Unit is then clipped securely over the Fixing Clip providing a strong fix to the eaves.

• Suitable for new build or refurbishment
• Compatible with natural slate and interlocking clay tiles
• Robust uPVC material
• Fast and easy to fit in all weather conditions

The Verge Union can be used to cover a joint where two LH or RH Linear Verge Units abut each other. For roofs where the bottom course tiles are tilted upwards, cover the nail head and joint using a verge union. Hooke the verge union around the top flange between the linear verge unit and the tiles, then firmly push the verge union onto the joint until the clip engages with both linear verge units.

• Exceptionally secure
• Also suitable in sarking board details
• Compatible with natural slate and interlocking clay tiles
• Various colours available

The Linear Dry Verge Eaves End are designed to neatly finish and close the bottom section of Linear Dry Verge down at eaves level. In some instances, it may be necessary to extend the bottom Linear Dry Verge unit passed the gutter and fit the Eaves End so that it doesn't foul on the guttering (see illustrations in the Product Info sheet). The Eaves End is will slide into the end of the bottom Linear Dry Verge unit and should be secured in place using a suitable adhesive. 

• NHBC Standards Chapter 7.2 Approved
• Compatible with natural slate and interlocking clay tiles
• Fast and easy to fit in all weather conditions
• Various colours available

A GRP Bonding Gutter Jointing Strip is manufactured from glass fibre/polyester laminate with a UV-resistant polyester film on the upper face. A sanded strip is bonded along the upper face to provide a key for bedding the roof tiles into mortar.

The Bonding Gutter gives a weatherproof seal between adjacent roofs. It joins any combination of double lap or interlocking slates, clay or concrete tiles, with minimum disturbance to the adjacent roof.
The packs should be stored flat on a smooth, clean, dry surface; under cover and protected from sunlight.

• Lightweight and flexible
• UV Resistant
• Provides a weather tight seal between adjacent roofs with different finishes
• Safe and easy to cut
• BBA certified

A GRP Dry Bonding Gutter is a mortarless system which creates a weather tight joint between dissimilar roof coverings on adjacent roofs, and joins any combination of slates or flat and profiled tiles.

The Dry Bonding Gutter is supplied in 3m lengths, in a standard 80mm (low) profile. Depending on the roof covering being used, a 100mm (high) profile is also available upon request. They are finished in a standard lead grey colour, and are BBA certified.

The Dry Bonding Gutter creates a close-cut appearance on refurbished properties where fixing times can be cut by up to 50% over traditional mortar methods. Packs should be stored flat on a smooth, clean dry surface; under cover and protected from sunlight.

• Improved drainage
• No mortar required
• Improved appearance
• Time saving