Menu

Z Stone® Wall Cladding

WP_20180905_12_18_57_Pro.jpg

Z Stone cladding continues to be one of the most versatile offerings from LBS and has been used on prestigious residential and commercial projects, across the whole of Ireland and GB.

Z Stone is an innovative natural stone cladding system, comprising of Z-shaped panels that simply slot together to create a natural stone wall effect. 

  • Quick and easy to install
  • Extremely cost-effective compared to traditional stone masonry
  • Minimal wastage. No mess, no fuss
  • Available in a wide range of natural stone finishes
  • Suitable for both interior and exterior application
  • 90 degree corners available! 

Expanding Foam Tape 20 / 6-15mm

Width /Gap Size 20mm / 6-15mm (600pa Weather Seal)
Roll Length 4.3 metres max expansion / 36mm
Expanding_Foam_Tape_EXP_6_10_1-4_x_13M_e901891c-8709-4200-8fc4-7912e97e5204_360x.jpg

Expanding Foam Tape is a pre-compressed PU foam tape which has a polymeric dispersion. It is used for joint sealing to create weather seals (600pa protection from wind driven rain) and improve airtightness as well as acoustic performance.

Where reveal detail is required at windows and door opening (during Z Stone fitting) all block work must be recessed by a minimum of 50mm, to allow for the return of Z Stone back into the frames. Always check prior to fitting, so as the window and door openings will not be obstructed.

This tape will neatly close off any remaining gaps to give a neat and weatherproof finish. Z Stone may not be returned on the underside of a window or door head. To achieve a finish here, use special width Keystone Lintel, or alternatively finish with a slate reveal unit or rubbed-up plaster detail.

 

 

Speak to one of our specialists today