Menu
- Natural Roofing Slate
- Clay Roof Tiles
- Z Stone
-
Z Stone Range
- Black Slate
- Blue Diamond
- Nordic Stone
- Quartz
- Icelandic Grey
- Scandinavian Mix
- Granite
- Multi Slate
- Heather Blue
- Natural Stone Products
- Roofing Accessories
- About Us
- Case Studies
- Videos
- Technical Support
- Contact Us
- Request a Callback
- Natural Roofing Slate
- Clay Roof Tiles
- Z Stone
- Natural Stone Products
- Roofing Accessories
- About Us
- Case Studies
- Videos
- Technical Support
- Contact Us
- Request a Callback
- Natural Roofing Slate
- Clay Roof Tiles
- Z Stone
- Natural Stone Products
- Roofing Accessories
Vermont Non-Fading Green
- Vermont unfading green from the Vermont area is a very high quality green slate
- The slate is dense and finely grained, with pale green veining
- American slate tends to be a weathering slate but LBS source only unfading green from a single source
- Vermont green can be used by itself but also looks fantastic as banding on a Penrhyn roof (such as the Lynn Building at Queen's University)
- Vermont unfading green is available in 50x30cm and has a nominal thickness of 9mm
- Vermont green slates achieve the highest possible classification under the European standard BS EN 12326-1:2014 and are W1, S1 and T1
- Vermont green slates are covered by a 100 year quarry backed guarantee
Vermont Green Gallery
Product Detail
Vermont Slate - The Lynn Building Queens Belfast
Designed by Charles Lanyon and recently refurbished to an exceptional standard the Lynn Building is instantly recognisable to any visitor to Queens University.
View Case Study| Colour and Finish | Green Riven Textured |
| Available in Sizes | 500 x 300mm |
| Available in Grades | One Prime Grade |
| Nominal Thickness | 9mm |
| Minimum Pitch | 22.5 deg for standard 100mm h/lap (for pitches below 22.5 deg please consult LBS Technical Dept) |
| Maximum Headlap | All LBS slates are holed for 100mm head-lap |
| Alternative Headlaps | For availability and advice please contact LBS |
| Gauge | 200mm for slate pre-holed for 100mm head-lap |
| Batten Size | Please refer to BS 5534 or SR 82:2017 |
| Nails | Copper, Aluminium, or Silicon Bronze |