Menu
-
Roofing
- Natural Roofing Slate
- Clay Roof Tiles
- Roofing Accessories
- Cladding
- Natural Stone Products
- About Us
- Case Studies
- Videos
- Technical Support
- Contact Us
- Request a Callback
-
Roofing
- Natural Roofing Slate
- Clay Roof Tiles
- Roofing Accessories
- Cladding
- Natural Stone Products
- About Us
- Case Studies
- Videos
- Technical Support
- Contact Us
- Request a Callback
-
Roofing
- Roofing
- Natural Roofing Slate
- Clay Roof Tiles
- Roofing Accessories
- Cladding
- Natural Stone Products
Expanding Foam Tape
- Expanding foam tape is a pre-compressed PU foam tape which is impregnated with a polymeric dispersion
- Used for joint sealing to create weather seals and improve air tightness as well as acoustic performance
- 600pa protection from wind driven rain
- EXP 6 remains permanently flexible throughout its life span making it an ideal solution for joints that are subject to movement.
- This tape will not harden or crack with expansion cycles
- Quick and easy to install and can be done so with minimal training
Expanding Foam Tape 20 / 6-15mm
| Width /Gap Size | 20mm / 6-15mm (600pa Weather Seal) |
| Roll Length | 4.3 metres max expansion / 36mm |
Where reveal detail is required at windows and door opening (during Z Stone fitting) all block work must be recessed by a minimum of 50mm, to allow for the return of Z Stone back into the frames. Always check prior to fitting, so as the window and door openings will not be obstructed.
This tape will neatly close off any remaining gaps to give a neat and weatherproof finish. Z Stone may not be returned on the underside of a window or door head. To achieve a finish here, use special width Keystone Lintel, or alternatively finish with a slate reveal unit or rubbed-up plaster detail.
