An interlocking natural clay plain tile that requires approximately 20 tiles per square metre. The new 20/20 has been redesigned with an open gauge for ease of installation.

Benefits and features:

• New generation interlocking clay tile with easy to lay open gauge
• More cost effective than all traditional plain tiles
• Up to 30% saving on installation costs
• Reduces completion times by up to 30%
• Approx 20 tiles per square metre
• Requires approx 60% fewer battens
• Half the weight of concrete plain tiles and over 40% lighter than clay plain tiles
• 60 year product guarantee when fixed according to manufacturers recommendations
• Performs at pitched down 20 22.5 degrees
• Pressed from natural alluvial Humber clay and available in 4 permanent colours
• High performance weatherproof design developed through extensive wind testing
• Easy fix Pushclip system available for fast and efficient mechanical fixing

Colours

• Natural Red
• Flanders
• Antique Slate
• Tuscan

• Minimum roof pitch: 22.5 degrees
• Headlap (minimum): 75 mm
• Headlap (maximum): 120 mm
• Batten spacing at max gauge: 255 mm
• Batten spacing at min gauge: 210 mm
• Size of tile: 330 × 226 mm
• Covering capacity at max gauge: 20.5 tiles per m2
• Cover Width: 191 mm
• Profile depth: 16 mm
• Hanging Length: 300 mm
• Weight as laid: 42 kg per m2
• Weight per 1,000: 2.1 tonnes
• Weight per tile: 2.1 kg
• Weight per pallet: 1.1 tonnes
• Quantity per pallet: 480
• Battens per m2: 3.9 m
• Batten Size
• Up to 450mm rafter centres: 38 × 25 mm
• Up to 600mm rafter centres: 50 × 25 mm
• Nail size / type for tiles: 50 × 3.35mm
• Nail size / type for tile clips: 65 × 3.35mm

Note: unless otherwise stated, data is based on tiles laid at minimum headlap.