Installation

Z Stone® should be fixed against a solid wall by a special adhesive (LBS recommend Ardex X7G+ adhesive) which is strong enough to hold the weight of the product which is 65kg/m2. For heights above 3 metres, it is recommended that the product is applied using with a mechanically fixed system.

One of the major advantages of using Z Stone® is that it is quite simple to apply and it eliminates the need for specialist tradesmen.

Once the adhesive is applied to the back of the panels you start from the lowest row, fitting the panels together along the wall, ensuring the 'Z' panels are clicked into place. When moving to the second row, you must ensure that the joints between the pieces are alternated to avoid them being visible.

Whenever corners are used in the application it is important to begin here. You must use a long-cornered piece at the bottom row and then alternate between courses with short corner pieces as you move up the wall.

Z Stone® is incredibly quick and easy to install and is a fraction of the price of traditional stone builds.